Flygt Mechanical Seals FEU-22 Upper Parts for Flygt 2070/2102-40/3082 Pump

 Flygt Mechanical FEU Seal-22

Replacement for:

 

FEU-22 upper parts for flygt 2070 pump

 

FEU-22 upper parts for flygt 2102-40 pump

 

FEU-22 upper parts for flygt 3082 pump

 

Features:

 

Original Sweden design

 

Big stock

 

Wilo pumps

 

ITT pumps

 

Flygt Pump Model of Flygt Mechanical Seals FEU-22:

2070, 2102-40, 3082

 

China Sealcon supplies a wide range of seal products for pump. Both standard and custom-designed sealing products are available. Top-quality mechanical seals for China agitator are also in stock. The top-quality seals can be used for various applications including ISO, DIN, API, etc. 7x24h postpurchase service is promised.

 

 


Comments

Post a Comment

Popular posts from this blog

Mechanical Seal Material

Image
  According to statistics, about 80% to 95% of the leakage of mechanical seals is caused by sealing faces and friction pairs. Flygt pump seals has this problem. In addition to keeping the sealing surface parallel, it is mainly the material problem of the friction pairs. The design of most mechanical seals uses stiffer materials to make the revolving surface, so that it can rotate friction on the soft stationary surface. The rotating surface is now made of stainless steel or harder material, such as tungsten carbide or silicon carbide. Graphite or Teflon is used for stationary surfaces.   Material selection of mechanical seal friction pairs is a complex problem. In general, it should be selected according to the properties of the working medium, pressure, temperature and rotation speed, and the ability to withstand short time friction when the pair is started or the liquid film is destroyed. Taking into account the above factors, the material of the friction pair should have th...
Read more

Seal Spare Parts Spring

Image
  Introduction of Seal Spare Parts Spring For a spring mechanical seal , the initial closing force ensures that the seal will function properly from startup. In end- or rotating-face mechanical seal designs, the initial closing force is provided by a spring component, which can be a single coil spring, multiple coil springs, a deflected bellows unit (elastomer or metal), or formed or flat springs. Initial biasing forces also can be created by magnets, compressed elastomers or any other means of applying a closing force between sealing elements.   For single spring seal , the seal body is sprung by either a metal or rubber bellows, a series of small springs, or by a single coil spring. These seals must be fitted with the correct coil spring for the rotation of the shaft. The major cause of failure of this type of seal is a broken drive spring. This is due to the use of 316 SS stainless steel as the coil material. The spring has to maintain the drive of the seal head and to flex...
Read more