Flygt Mechanical FBU Seals-28

 Flygt Mechanical FBU Seals-28

Replacement for:

 

FBU-28 upper parts for flygt 3101, flygt 2075 pump

 

Features:

 

Original Sweden design

 

Big stock

 

Wilo pumps

 

ITT pumps

 

As one of china mechanical seal manufacturers, we will do our best to meet all the needs of customers.

 

Different materials including carbon, ceramic, silicon carbide, tungsten carbide etc. are available in SEALCON China Manufacturer, so as to be widely applied in different industries, such as oil and gas, chemical, pulp and paper, etc.




Comments

Post a Comment

Popular posts from this blog

Mechanical Seal Material

Image
  According to statistics, about 80% to 95% of the leakage of mechanical seals is caused by sealing faces and friction pairs. Flygt pump seals has this problem. In addition to keeping the sealing surface parallel, it is mainly the material problem of the friction pairs. The design of most mechanical seals uses stiffer materials to make the revolving surface, so that it can rotate friction on the soft stationary surface. The rotating surface is now made of stainless steel or harder material, such as tungsten carbide or silicon carbide. Graphite or Teflon is used for stationary surfaces.   Material selection of mechanical seal friction pairs is a complex problem. In general, it should be selected according to the properties of the working medium, pressure, temperature and rotation speed, and the ability to withstand short time friction when the pair is started or the liquid film is destroyed. Taking into account the above factors, the material of the friction pair should have th...
Read more

Pump Wear Plate

Image
Pump Wear Plate For users, the maintenance of daily use is more important to prolong their life, so the following two points must be done: tighten the wear-resistant plate (ring) of the nut regularly. After the use of a period of time, there is a little wear on the wear-resisting layer due to the existence of abrasive wear in the braided concrete cylinder, so that a small amount of wear is made on the wear-resistant layer, and the loosening of the locking nut will appear. The thrust ring is not compressed without producing elastic force. There will be a certain gap between the wear plate and the wear-resisting ring. At this time, the fine particles in the concrete will enter the wear plate and the wear-resisting ring, forming a low-stress abrasion wear. As the speed of wear is accelerated, the gap between the wear plate and the wear-resistant ring will become larger, making the large particles of concrete into the room, quickening the wear and scratch of the wear-resistant...
Read more

Flygt Mechanical Seals FEU-22 Upper Parts for Flygt 2070/2102-40/3082 Pump

Image
  Flygt Mechanical FEU   S eal -22 Replacement for:   FEU-22 upper parts for flygt 2070 pump   FEU-22 upper parts for flygt 2102-40 pump   FEU-22 upper parts for flygt 3082 pump   Features:   Original Sweden design   Big stock   Wilo pumps   ITT pumps   Flygt Pump Model of Flygt Mechanical Seals FEU-22: 2070, 2102-40, 3082   China Sealcon  supplies a wide range of seal products for pump. Both standard and custom-designed sealing products are available. Top-quality mechanical seals for C hina agitator  are also in stock. The top-quality seals can be used for various applications including ISO, DIN, API, etc. 7x24h postpurchase service is promised.    
Read more