PTFE TEFLON BELLOW MECHANICAL SEALS

 Polytetrafluoroethylene (PTFE) is one of the best corrosion resistant materials in the world. Therefore, it is called "the king of plastic". So the PTFE pump seals can be used in any kind of chemical medium for a long time.

 

PTFE Teflon Bellow Mechanical Seal for Sale

China PTFE Teflon Bellow seal has been widely applied in the area of atomic energy, defense, aerospace, electronics, electrical, chemical, mechanical, instrument, instrument, building, textile, metal surface treatment, pharmaceutical, medical, textile, food, metallurgy and smelting industries, and has become an indispensable product.

 

Teflon PTFE Bellow Seals T11T12

Replacement for:

John Crane 10T

John Crane 10R

Features:

PTFE Bellow Seal

 

Teflon PTFE Bellow Seals T91

Replacement for:

WB2

Features:

PTFE Bellow Seal

Corrosion resistance

 

Application of PTFE Bellow Mechanical Seal

The mechanical seal of the PTFE bellow seal, which adopts the multi-spring structure, is the most widely used mechanical seal in the corrosion resistant pump.

Following is the Operating parameters:

Specification: 35~65mm

Temperature: -10 C ~+100 C

Pressure: less than 0.5MPa

Line speed: 15m/s

Axial channeling: + 0.5mm

Suitable medium: strong acid, strong oxidizing agent and other strong corrosive media.

Main Advantages of PTFE Mechanical Seal

PTFE bellow seal can be applied to the fields of food, medicine, medicine and so on.

PTFE bellows seals for pumps has the function of physiological inertia, sterilization and disinfection.

PTFE bellows seal design has small friction resistance, no adhesion and creeping effect; high pressure;

PTFE bellow seal has good resistance to deformation and resistance to extrusion; it is easy to install and complete in size.

The elastic inner core has good elasticity, which greatly improves the sealing effect of PTFE mechanical seal.

Performance of the Welded PTFE Bellow Seals

1. High-temperature resistance: PTFE bellows for pump has little affected by the temperature,, the range of temperature range is wide, can be used at -190~260 C.

2. Low-temperature resistance: with good mechanical toughness, even if the temperature drops to -196 C, PTFE seal can also maintain 5% elongation.

3. Insulation: PTFE mechanical seal not affected by the environment and frequency, the volume resistance can reach 1018 ohm/cm, the dielectric loss is small, and the breakdown voltage is high.

4. High lubrication: the friction coefficient of the solid material is the lowest; the known solid material can not adhere to the surface, and it is a kind of solid mechanical seal with the smallest surface.

5. Strong self - moistening: the friction coefficient of the solid material is 0.04 with the smallest coefficient of friction in plastic. PTFE bellows seal design is an ideal oil free lubricating seal.

6. No poison: physical inertia, seals can be used in the vast majority of the pump body; aging resistance can be used in the atmosphere for a long time;

7. Pollution prevention: the blank value of metal elements is very low, the content of lead is less than 10-11 g/ml, and the content of uranium is less than 10-12 g/ml.

8. Resistance to atmospheric aging, radiation resistance and low permeability: even though the PTFE seal is long exposure to the atmosphere, the surface and performance remain unchanged.

 

9. Chemical corrosion resistance and weatherability: PTFE bellow seal is hardly corroded by any chemical reagent except for molten alkali metals. For example, in concentrated sulfuric acid, nitric acid, hydrochloric acid, even in the aqua boil, no change in the weight and performance, almost insoluble in all solvents, only more than 300 DEG C slightly soluble in the alkane (about 0.1g/100g). PTFE Bellow seal does not absorb moisture, does not flammable, and is very stable to oxygen and ultraviolet light, so it has excellent weatherability.

 

Hangzhou Sealcon Fluid Machinery Co., Ltd, as one of top metal seal suppliers china, has many years experience on the PTFE bellow seals producing. Can widely used in many different areas.



Comments

Post a Comment

Popular posts from this blog

Pump Wear Plate

Image
Pump Wear Plate For users, the maintenance of daily use is more important to prolong their life, so the following two points must be done: tighten the wear-resistant plate (ring) of the nut regularly. After the use of a period of time, there is a little wear on the wear-resisting layer due to the existence of abrasive wear in the braided concrete cylinder, so that a small amount of wear is made on the wear-resistant layer, and the loosening of the locking nut will appear. The thrust ring is not compressed without producing elastic force. There will be a certain gap between the wear plate and the wear-resisting ring. At this time, the fine particles in the concrete will enter the wear plate and the wear-resisting ring, forming a low-stress abrasion wear. As the speed of wear is accelerated, the gap between the wear plate and the wear-resistant ring will become larger, making the large particles of concrete into the room, quickening the wear and scratch of the wear-resistant
Read more

Magnetic Pumps

Image
 The magnetic pump china  is a branch of the pump, and is a new product that applies the working principle of the permanent magnet coupling shaft to the centrifugal pump. In the production process of petroleum, chemical industry, pharmaceutical, printing and dyeing, electroplating, food, environmental protection, etc., it is used to transport corrosive liquid with no iron scrap. The composition of magnetic pump Magnetic pump mainly consists of pump head, magnetic actuator (magnetic cylinder), motor, base and other parts. The magnetic actuator consists of an outer magnetic rotor, an internal magnetic rotor and a non-conductive isolation sleeve. Working principle of magnetic pump When the motor drives the external magnetic rotor to rotate, the magnetic field can penetrate the air gap and non-magnetic material, and drive the inner magnetic rotor connected with the impeller to rotate synchronously, realize the non-contact transmission of power and transform the dynamic sea
Read more

Difference between Single and Double Mechanical Seal

Image
 The basic types of mechanical seals for pumps are classified as double mechanical seal vs single mechanical seal   and series mechanical seals. The single end face mechanical seal consists of a pair of sealing ends; The double mechanical seal consists of two sealing ends. The mechanical seals made up of two or two sets of mechanical seals with E single direction mechanical seals are series mechanical seals. The following two main types of mechanical seals are mainly described to   understand the difference between single and double mechanical seal . Single mechanical seal pump The single mechanical seal has the advantages of simple structure, low manufacturing cost, convenient installation and operation, and is generally used for oil, water, organic solvents and corrosive medium. There are vertical single stage pipeline centrifugal pumps and horizontal centrifugal pumps which use single side seal pumps. Double mechanical seal centrifugal pump Double mechanical seal parts are mostly us
Read more