FLYGT MECHANICAL SEALS

Flygt mechanical seals are usually used in the Swedish ITT Flygt mixer and submersible sewage pumps.They are one of the essential flygt spare parts for mechanical seals for flygt pumps. The structure is divided into old structure, new structure (Griploc seal) and cartridge mechanical seal (plug in types).

To save costs, Sealcon manufactures a series of flygt pump seals according to the original materials and sizes for replacement. Browse the flygt pump seals page to get more information. Any inquiry is welcome.

 

Advantages of Flygt Mechanical Seals

Low leakage rates

Corrosion resistance

Long service life

Easy installation

Applications of Flygt High Pressure Mechanical Seal

Flygt pump replacement seals can be used on mixers and as Flygt submersible pump parts

Water

Wastewater

Oil

Low corrosive liquid

Benefits of Sealcon's Flygt Pump Mechanical Seals

Xylem ITT Flygt is a world-renowned submersible pump brand. The products are widely used in world's major sewage treatment industry. Xylem designed and manufactured its own original mechanical seals for flygt pumps. However, original Flygt pump seals are extremely expensive, near to buy a brand low-power pump. To meet demands of world’s end users, Sealcon supply Flygt replacement seals in strict accordance with the original size of the mold parts, using the material in accordance with original materials. All of our Flygt replacement mechanical seals have more than a year long service life. Now the seals are widely used in many sewage treatment industries, completely replace original products.

 

Sealcon's Flygt seals series is complete, all series are available from stock and enjoy 3-5 days fast delivery, the price is one-third of the original. Please inform us of the pump model you use, then we will quote you correct seals within 24 hrs.

 

Features of Flygt Pump Mechanical Seals

Flygt pump seals usually have two seals: Upper seal and Lower seal. These should not be seen as a primary and a secondary seal, but rather two independent seals with slightly different functions.

 

The lower seal is exposed to a harsh environment and must be able to cope with fibrous clogging matter, hard abrasive particles, chemically aggressive media, high pressure, impacts, etc. Therefore lower seals have in general a sturdy design that can withstand a lot of abuse. Hard seal face- tungsten carbide is the only option for the lower seal. The upper seal operates in a controlled environment that is less taxing. Since there are no abrasive particles in the buffer fluid, carbon, ceramic and silicone carbide faces can also be used as cheaper options instead of hard faces. Due to that, Flygt mechanical face seals have low leakage rates.

 

In addition, the flygt mechanical seals are designed to accommodate short shaft overhang. Torque locks and drivers are independent of the shaft rotation and pump pressure acts as a closing force on the seal.

 

Flygt seals are also versatile. The ultimate goal is that one and the same seal should be able to cope with all applications. Therefore, the lower seal always has hard faces and rubber parts that tolerate high temperatures, even if the pump is used for pumping plain drinking water. With just one standard seal, compatible with most pump or mixer media, the choice of seal is simple.

 

New design- Griploc seals

The robust design of Griploc seals provides consistent performance and long, trouble-free operation. The seal faces’ ability to maintain their flatness results in outstanding leakage prevention and the patented Griploc design securely locks the seal to the shaft.

The Griploc seal is used for both upper and lower sealing. Mounted in the upper position it prevents liquid from entering the motor housing and as the lower seal it prevents leakage of the pumped media into the buffer chamber.

 

Cartridge type- Plug-in Seals

Flygt Plug-in Seals feature two independent mechanical seals mounted in a single ready-to-install unit. Simply place the Plug-in Seal into position, no special service tools are required. Intelligent design protects sensitive sealing surfaces and springs from impurities, which contributes to enhanced sealing reliability, less downtime and reduced maintenance costs.

 

Plastic plug-in seals and Metal plug-in seals are both available from Sealcon.

 If you want to know more about flygt pump mechanical seal installation, please visit our website.



Comments

Post a Comment

Popular posts from this blog

Pump Wear Plate

Image
Pump Wear Plate For users, the maintenance of daily use is more important to prolong their life, so the following two points must be done: tighten the wear-resistant plate (ring) of the nut regularly. After the use of a period of time, there is a little wear on the wear-resisting layer due to the existence of abrasive wear in the braided concrete cylinder, so that a small amount of wear is made on the wear-resistant layer, and the loosening of the locking nut will appear. The thrust ring is not compressed without producing elastic force. There will be a certain gap between the wear plate and the wear-resisting ring. At this time, the fine particles in the concrete will enter the wear plate and the wear-resisting ring, forming a low-stress abrasion wear. As the speed of wear is accelerated, the gap between the wear plate and the wear-resistant ring will become larger, making the large particles of concrete into the room, quickening the wear and scratch of the wear-resistant
Read more

New Technology Of End Face Mechanical Seal

Image
  With the rapid development of science and the continuous emergence of new materials, the technology of mechanical seal has been further developed. The promotion and application of new technology of mechanical seal aims at reducing product leakage and environmental pollution, while extending the service life of mechanical seal device. In summary, the new technology of end face mechanical seal mainly includes the following three types:   1. Split mechanical seal technology One end of the split mechanical seal is a connection sealing cavity with a special shape groove inside. At the other end, the corresponding position is a joint with a similar shape boss at the front end and a connecting groove at the rear. The two part of the joint is made up of the structure with ring arc protrusion, and the joint is pressed into the sealing cavity when installing, so as to achieve the purpose of sealing, and change with the pressure changes, the performance of sealing, reliability and durability ha
Read more

Magnetic Pumps

Image
 The magnetic pump china  is a branch of the pump, and is a new product that applies the working principle of the permanent magnet coupling shaft to the centrifugal pump. In the production process of petroleum, chemical industry, pharmaceutical, printing and dyeing, electroplating, food, environmental protection, etc., it is used to transport corrosive liquid with no iron scrap. The composition of magnetic pump Magnetic pump mainly consists of pump head, magnetic actuator (magnetic cylinder), motor, base and other parts. The magnetic actuator consists of an outer magnetic rotor, an internal magnetic rotor and a non-conductive isolation sleeve. Working principle of magnetic pump When the motor drives the external magnetic rotor to rotate, the magnetic field can penetrate the air gap and non-magnetic material, and drive the inner magnetic rotor connected with the impeller to rotate synchronously, realize the non-contact transmission of power and transform the dynamic sea
Read more