Flygt Mechanical Seals FSU-90

Flygt Mechanical Seals FSU Seal-90

Replacement for:

FSU-90 upper parts for flygt 3230, 3500, 3501 pump

FSU-90 upper parts for flygt 3300, 3305, 3310, 3311, 3312, 3350, 3351, 3355, 3356, 3357 pump

Features:

Original Sweden design

Big stock

Wilo pumps

ITT pumps

Flygt Pump Model of Flygt Hydrocarbon Pump Mechanical Seal FSU-90:

3230, 3300-91, 3300-181, 3300-280, 3300-980, 3305, 3310, 3311, 3312, 3350

3351, 3355, 3356, 3357, 3500, 3501, 3530, 3531, 3600, 3601, 3602, 7050, 7051

7055, 7060, 7061, 7076, 7556, 7080, 7115, 7570, 7585, 605, 615, 665, 670, 680

705, 715, 720, 721, 735, 745, 760, 765, 770, 775, 820, 840, 841, 860, 880, 881, 900

 

As one of the reliable china pump supplier in China, Hangzhou Sealcon Fluid Machinery Co., Ltd's products are sold globally and used in diverse industries.

Our aim is to be one of the top mechanical seal manufacturers.

 


Comments

Post a Comment

Popular posts from this blog

Pump Wear Plate

Image
Pump Wear Plate For users, the maintenance of daily use is more important to prolong their life, so the following two points must be done: tighten the wear-resistant plate (ring) of the nut regularly. After the use of a period of time, there is a little wear on the wear-resisting layer due to the existence of abrasive wear in the braided concrete cylinder, so that a small amount of wear is made on the wear-resistant layer, and the loosening of the locking nut will appear. The thrust ring is not compressed without producing elastic force. There will be a certain gap between the wear plate and the wear-resisting ring. At this time, the fine particles in the concrete will enter the wear plate and the wear-resisting ring, forming a low-stress abrasion wear. As the speed of wear is accelerated, the gap between the wear plate and the wear-resistant ring will become larger, making the large particles of concrete into the room, quickening the wear and scratch of the wear-resistant
Read more

Magnetic Pumps

Image
 The magnetic pump china  is a branch of the pump, and is a new product that applies the working principle of the permanent magnet coupling shaft to the centrifugal pump. In the production process of petroleum, chemical industry, pharmaceutical, printing and dyeing, electroplating, food, environmental protection, etc., it is used to transport corrosive liquid with no iron scrap. The composition of magnetic pump Magnetic pump mainly consists of pump head, magnetic actuator (magnetic cylinder), motor, base and other parts. The magnetic actuator consists of an outer magnetic rotor, an internal magnetic rotor and a non-conductive isolation sleeve. Working principle of magnetic pump When the motor drives the external magnetic rotor to rotate, the magnetic field can penetrate the air gap and non-magnetic material, and drive the inner magnetic rotor connected with the impeller to rotate synchronously, realize the non-contact transmission of power and transform the dynamic sea
Read more

Difference between Single and Double Mechanical Seal

Image
 The basic types of mechanical seals for pumps are classified as double mechanical seal vs single mechanical seal   and series mechanical seals. The single end face mechanical seal consists of a pair of sealing ends; The double mechanical seal consists of two sealing ends. The mechanical seals made up of two or two sets of mechanical seals with E single direction mechanical seals are series mechanical seals. The following two main types of mechanical seals are mainly described to   understand the difference between single and double mechanical seal . Single mechanical seal pump The single mechanical seal has the advantages of simple structure, low manufacturing cost, convenient installation and operation, and is generally used for oil, water, organic solvents and corrosive medium. There are vertical single stage pipeline centrifugal pumps and horizontal centrifugal pumps which use single side seal pumps. Double mechanical seal centrifugal pump Double mechanical seal parts are mostly us
Read more