chinasealcon

The mechanical seal used in the water pump seal is one of the most effective ways of rotating mechanical seal. The precision of its own processing is relatively high, especially the dynamic, static ring. If the disassembly method is not appropriate or is in improper use, mechanical seal after assembly not only can not achieve the purpose of sealing, but also damage the assembled sealing elements. 1. Preparation and matters needing attention before installation of water pump seal After the above maintenance work is completed, the machine seal needs to be installed again. Prior to installation, preparations must be made: 1.1 If the replacement of a new seal is needed, we must check whether the model, specification of the mechanical seal is correct or not, the quality is in line with the standard or not; 1.2 1mm-2mm axial clearance shall be maintained between the anti-rotating groove end at the end of the static ring and the top of the anti-reselling pin to avoid buffer failure; 1.3 Th...

Mechanical Seals in Water Plant With the rapid development of the international economy, the increase of population and the improvement of people's living standards, and the acceleration of industrialization and urbanization, water consumption has increased dramatically. Meanwhile, the discharge of sewage has increased correspondingly, which has exacerbated the shortage of fresh water and the pollution of the water environment. Seal in Water Treatment In order to improve the water environment, protect the water resources, the relevant departments have combined the specific conditions of water pollution, take comprehensive measures for the prevention and control of water pollution and the protection of water resources. And the research, development and application of innovative technology for low infrastructure costs, low energy consumption, and low operating costs. According to local conditions, we should combine measures of treatment and utilization, and use ecological treatment...

Mechanical Seals in Pulp Plant The mechanical seal is widely used in pulp and paper industry. The excellent sealing performance is one of the important factors in the high-efficiency operation of the pulp and paper industry and the chemical industry. In recent years, the mechanical seal technology of pulp and paper industry and chemical industry is developing constantly. It is of high theoretical value and practical significance to summarize and analyze the use of mechanical seal technology to better guide production. Requirements for Paper Plate Seal The production of pulp and paper industry and chemical industry requires a lot of high-speed liquid pumps, slurry pumps and water pumps to transport water, slurry, acid and alkali chemicals in production. And the pulping and papermaking equipment, from cooking to papermaking and coating technology, should use many pumps, slurry pumps and various pharmaceutical pumps. In the key parts of these pumps, it is necessary to have a reliable se...

Seals for Pharmaceutical Industry The continuous development of new drugs and healthcare products has increased the capacity of the pharmaceutical industry, but also brought great competition. Pharmaceutical manufacturers through improved procedures to improve the performance of their rotating equipment, and to maintain its compliance with the specification. Lower leaks and improved purity are two major concerns of sealed rotary equipment, both of which complement each other. Characteristics of Rotary Seals for Pharmaceutical Industry Sealcon Mechanical Seals Achievements in Biotechnology and Pharmaceutical Systems thanks to its extensive experience in pharmaceutical and biotechnology, Sealcon mechanical seals are well aware of the stringent requirements of the medical regulatory sector in the medical industry. Product Integrity: For the biotech and pharmaceutical industries, it is important to ensure complete consistency of product characteristics in each batch of products. Sealco...

Mechanical Seals For Petrochemical Industry Sealcon mechanical seal can be used in the petrochemical industries. We also have the certain knowledge about mechanical seals for petrochemical industry, and the mechanical seal products are also widely used in the petroleum industry. Petrochemical Pump Seal Solution In petrochemical industry, the transport medium of rotating equipment is usually high temperature, high pressure, flammable, explosive, toxic and harmful fluid, and its reliability is particularly important. Mechanical seal has been widely used because of the advantages, such as high reliability, good interchangeability, simple structure and compact structure, convenient maintenance and so on. We need to analyze the seal structure, material and flushing, and choose the suitable petrochemical mechanical seal for the pump, so as to improve the reliability of the seal.Compared with single face mechanical seal, double face mechanical seal is suitable for strong corrosion, suspe...

Mechanical Seals in Oil Factory In recent years, with the rapid development of modern industry, the oil and gas industry, as an important industry which is related to the comprehensive strength of the country, has developed very rapidly. At the same time, the oil and gas enterprises have made certain progress in the scale and technical level of their equipment. The mechanical oil and gas seal( dry mechanical seal and wet gas seal ) also has become one of the most important research topics. At the same time, people are getting more and more attention on this part. Advantages of Oil and Gas Seals The oil and gas mechanical seal has many advantages, mainly for the reliable sealing performance, a small amount of leakage, the use of a series of advantages of long life, low power consumption. It is widely used in mechanical equipment, such as pumps, fans, compressors and reaction kettle, and is also widely used in petroleum machinery. Selection of Mechanical Seals in Oil Factory and Gas ...

Marine Pump Seal Marine research focuses on three central issues: maritime rights and interests, marine resources, the marine environment. The international struggle for the exploitation and possession of deep-sea resources is becoming more and more intense. And the match with the deep-sea technical strength of the competition is also increasingly prominent. Sealcon Sealant Solutions With the continuous exploitation of marine resources, the use of underwater equipment is becoming more and more diversified. Because the underwater work has the characteristics of deep depth, long time and high complexity, and is directly related to personal safety, people's demand for the underwater equipment reliability and safety are increasing. Among them, the seal design is to ensure the normal use of underwater equipment, is the key link about the safety and reliability. Therefore, the excellent marine seal design is necessary. We can discuss the shipping seals as an example. Mechanical seals...

Mechanical Seals for Food Industry With global population continuing to grow, The sustainable delivery of food to the world is a worldwide challenge. Water is at the center of this concern, as food production is the largest single consumer of water. Reducing the water footprint of food production is a central goal of the food and beverage industry. Sealcon can assist in optimizing and managing every stage of a production facility's water cycle and the food problem. Characteristics of Food Pump Seal The mechanical seals are used for mixed food mixer, beverage mixer, the food pump and so on. Mechanical seals in Food And Beverage: food grade rubber seals (food grade shaft seals) & food pump seal Food pump is a machine for transporting food which containing gas-liquid, foam liquid, suspended rigid and soft granular medium. There is no dead angle in the pump chamber, and the polishing inside and outside surface can be quickly disassembled and installed for cleaning.And the mech...

In recent years, our country's economy continues to develop steadily, and at the same time, the demand for power supply is increasing continuously, and now the main channel of power production is the hydropower plant, so the hydropower plant is now closely connected with the people's life. Water turbine is an important part of hydropower plants. And as for water turbine, the main shaft seal is its indispensable component. But the main turbine shaft seal is easy to fail, and its safety cannot be guaranteed, so it is a problem to be solved urgently in the current domestic hydropower industry. At present, the water turbines usually operate in high pressure and high-speed environment, which causes great pressure on the pump seals . The pump sealing parts of the turbine are easily worn by the sediment in the water, and the leakage often occurs, which makes the working efficiency of the water turbine decline rapidly and its reliability is also reduced, so regular sealing part repla...